|
ACCESSORIES
Here you will find several accessories for your
Tanis Engine Preheating System. There are products
that make your preheating experience more
Convenient. Also, there are add-ons such as Battery
Heaters and Cabin Preheaters. Check out our
Battery Power Supply, Instrument Light replacement dimmer and our
Basic Maintenance Kit. Thanks for stopping by.
Prices effective 08-1-2008
Subject to change without notice.
PILOT LIGHT FMP FLUSH PLUG DOOR CORD MOUNT
EXTENSION CORD BATTERY HEATERS CABIN PREHEATER
TANIS ENGINE DEHYDRATOR FOR THE MECHANIC
INSTRUMENT LIGHT DIMMER
PILOT LIGHT
Pilot Light -
(FAA/PMA'd option on TANIS preheaters)
PLT
.................................................................$39
FLUSH MOUNT POWER
RECEPTACLE
Flush Mount Power
Receptacle (a component of FAA/PMA'd preheater
system)
FMP
.................................................................$42
INSERT FOR FLUSH
MOUNT PLUG
INSERT FMP....................................................$9.95
FLUSH PLUG
DOOR
RIVET IN FLUSH PLUG
DOOR - Used in conjunction with FMP above (Made
under FAA letter - requires form 337 and field
approval for installation)
PDR
.............................................................. $100
CORD MOUNT
BRACKET
Lycoming Cord
Mount Bracket (FAA/PMA'd option)
PMT
.................................................................$37
Extension Cord
Extension cord with pilot light. 100 ft, 16 ga.
Extremely durable, remains flexible in cold
temperatures.
EXT CORD
...........................................
$65
BATTERY
HEATERS
It's a fact, the colder your
battery gets the poorer it performs. So warm it up
with a Tanis Battery Preheater !
Tanis's
patented, thin, wrap around feature is designed to
give your battery an even, gentle, preheat
without overheating and yet allow you to use
it in a tight battery box without defeating
the box vents.
Battery preheaters are
available for both lead acid and
ni-cad applications with models available to
fit most popular sizes. Each heater will work with
your Tanis engine preheater or
independently.
Each kit includes:
1 ea. 115 VAC element
1 ea. harness with built-in thermostat
2 ea. grommets
tie wraps
Keep your schedule on time
and your investment protected this winter with a
Tanis Battery Preheater and enjoy
cold weather flying!
Heaters for lead acid
and nicad batteries. A self regulating heating
element with a back-up thermostat in the wiring
harness. (A minor alteration made under an FAA
Letter)
G25 Element Length = 22.5 inch
TAS200-00
.......................................................
$510
G240, G241, G242, G243 & G35 Elementh Length = 28.5 inch
TAS200-01
......................................................
$520
G641, G244, G245, G246, G247 & G640 Element Length = 31.5 inch
TAS200-02
......................................................
$530
G88, G639 & G6381 Elementh Length = 38.5 inch
TAS200-03
.......................................................
$555
CERAMIC HEATER
(500 Watts)
CERAMIC HTR..................................$375.00
(18" X 12") (8.5" X 32")
SAFE
CABIN HEAT
Heating Floor
Mats 500 WATTS PER PAIR
CBN
HTR........18 X 12 inch or 8.5 X 32
inch......$475.00
The Tanis Engine Dehydrator is designed to reduce the moisture in your aircraft engine crankcase in order to discourage the formation of rust on internal engine components. For info click on picture above.
TED......................................................$649.00
Provide engine and airframe info when ordering
BATTERY POWER SUPPLY FOR ENGINE PREHEATER
Tanis Battery Power Supply is designed for operation your Tanis Ailrcraft engine preheater on your home airport even if and electrical outlet is not conveniently available. With fully recharged batteries, it will heat a standard 4 cylinder engine for 4 hours and 6 cylinder for approximately 3 hours.
BPS..................INTRODUCTRY PRICE.................$495
Instrument
Light Dimmer Circuit
Are
your instrument lights operated from a panel
mounted rheostat that gets hot and takes excessive
panel space?
The
TANIS ILD2100 is a solid state
circuit that is made to replace your existing
unit.
The
ILD2100 is FAA approved by the STC/PMA process to
be a direct replacement for many Cessna and
Beechcraft light dimmers. The circuit uses a small
easily mounted potentiometer and a remote mounted
circuit.
The
unit is easily adapted to custom instrument panel
and radio installations. It will operate on either
14 v. or 28 v. DC power. Fused at 3 amps.
14
v. will operate up to 35 #330 bulbs
28 v. will operate up to 72 #327 bulbs
Will also operate radio dimmer circuits
Comes
with STC, Installation instructions and FAA
approved model list.
Replacement light dimmer
circuit for Cessna, Beech & Piper aircraft.
Replaces rheostat type dimmer. This system is
lighter and runs cooler than the rheostat that it
replaces. May be used for custom instrument panel
installations. (STC'd for most Cessna, Beech & Piper aircraft - FAA/PMA'd)
ILD 2100
.....................................................
$565.00
For The Mechanic
Basic Maint Kit
THE
PARTS YOU NEED MOST CONVENIENT AND
HANDY.
BMK.................................................................$595.00
Slotted Socked
Handy tool for TAS100 Cylinder Element Installation
Socket for TAS100..........................$16.00
Voltage Sensor
Indicates if voltage is present.
Voltage Sensor...................................$18.00
|
